70% of solid wood furniture products reveals a dazzling secret in the industry

Only if the bed is made of solid wood, it is called a "solid wood" bed.

Solid wood furniture refers to all natural wood that has not been reworked, and does not use any wood-based panels. Is there really so much solid wood furniture on the market? Are the furniture that carries the "solid wood" label made of solid wood?

In a furniture store in the city center, the reporter saw a double bed with a price of 8,900 yuan, marked with solid wood. The reporter asked what kind of solid wood, the sales staff said it was oak, and repeatedly said that it is definitely solid wood. However, when the reporter repeatedly confirmed whether the whole bed was made of oak, the salesperson had to reveal the truth: "Only the bed is made of oak." And said that it is impossible to buy the whole price of less than 10,000 yuan. Solid wood double bed.

Redwood, American oak, ash, and nanmu... The reporter traveled throughout the furniture store and found that the materials used for the furniture marked with solid wood had a wide variety of items, and the price was higher than the furniture marked with veneer veneer. However, under the continuous questioning of reporters, these merchants all admitted that the furniture sold was only part of the solid wood. Sales people admit that the average consumer will not ask so carefully, and they will not say that their furniture is all solid wood, so that even if consumers question afterwards, they have no fault.

However, the reporter interviewed randomly found that most consumers think that all the furniture marked "solid wood" should be made of solid wood. Some of the more attentive consumers will consciously move the furniture, try the weight of the furniture, and think that the weight should be real wood, in fact, this is not reliable. According to industry insiders, the current furniture manufacturing technology is very advanced. Non-solid wood furniture can be made more gorgeous than real solid wood furniture, and the weight is very heavy.

Marked "solid wood", the price can be up to 5 times the purchase price

In the same furniture store, the reporter found that some merchants detailed the product name, number, size, grade, origin, material and other information, and some only marked the price and origin. In the use of materials, the labels of each family are also very different, many simply labeled "solid wood". At present, the state has not yet imposed mandatory regulations on furniture products, and the phenomenon that manufacturers and distributors are marked by sex is everywhere. Although the price tags are different, each merchant is consistently keen on discounts. A set of sofas with a price tag of 10,000 yuan will be sold at a discount of 6.5 percent to the salesperson just after the inquiry. After some bargaining, the discount can be lower.

"There is also a low profit." This is the information disclosed by the industry, and the mystery lies in solid wood and non-solid wood. It turns out that the use of a variety of wood in a piece of furniture is very common. In the case of an ordinary wardrobe, the materials of the panel and the back panel are different. The side panels and the bottom panel often do not use the same material. It is normal for a wardrobe to use six or seven kinds of wood. The unspoken rule in the industry is that as long as the solid wood material exceeds 30%, it can be sold under the signboard of “solid wood” furniture. Actually, only some of the main materials are solid wood, and the auxiliary materials are some plates that have been veneered to make imitation wood. However, the furniture marked as "solid wood" and actually only partially solid wood can be sold for up to five times the cost.

Take a set of furniture with a price of 10,000 yuan as an example. The purchase price is generally only about 2,000 yuan. Even if the original price is 50% off, it can be sold for 5,000 yuan. If you encounter a buyer who will bargain, the price will be reduced to 40%. You can earn a lot of money.

Selling fake furniture stores, changing places in three or five years

“The furniture that is only partially solid wood is sold as furniture of all solid wood. This is still a manufacturer and merchant with 'conscience'.” Mr. Pan, who has been engaged in furniture sales for more than 20 years, broke the news. According to him, there are some small workshops that use moulded materials to make inferior furniture with resin materials and then sell them in the name of solid wood furniture, which costs only 20% of solid wood furniture. If you use materials such as lower foaming agents, the cost is lower.

Selling fake goods can't stand the test of time. Three to five years is enough to make the inferior furniture "exposed", but by that time, the shop that originally sold furniture may have long been easy to change, so the general furniture store stores are very mobile. Big, around 30%.

Destructive testing makes it difficult for consumers to defend their rights

In organizations such as the Consumer Rights Protection Association, furniture complaints are not rare. However, when the public heard that the inspection of furniture required destructive sampling such as drilling holes in furniture, and they had to pay for themselves, they finally lost. After all, a set of furniture is worth a lot of money, and ordinary people can't afford it. Moreover, the existing quality inspection technology can only detect whether the furniture is solid wood or plate or other materials, and can not detect which kind of wood.

I don’t want to take a look at it and know if the furniture is solid wood. Some experts in the industry have taught such a trick: find an inconspicuous corner on the back or bottom of the furniture, gently drill a small hole with a drill, and see it out. Is it wood chips?

However, in order to avoid future troubles, consumers should be cautious before buying. If the merchant claims to be solid wood furniture, try to get proof of it, which is the key evidence for future rights protection. Once you decide to purchase, it is best to let the merchant fill out the materials for each part of the furniture. If the merchant is obstructed for various reasons, and is unwilling to provide bills and write materials, consumers are advised not to buy it.

The most common phenomenon on the market is that merchants pretend to be pure solid wood furniture with furniture combined with wood and wood. Therefore, before buying, you must first ask whether the so-called solid wood furniture is pure solid wood, or the combination of wood and wood, or solid wood veneer. According to the different materials used, the furniture is divided into the following types: pure solid wood furniture, all the materials of the furniture are solid wood, including the table top, the door panel of the wardrobe, the side panels, etc. are all made of solid wood, without using any other form of artificial board, pure Solid wood furniture has very high requirements on craftsmanship and materials; mixed solid wood furniture is solid wood furniture in appearance, and the natural texture, feel and color of wood are exactly the same as solid wood furniture, but it is actually furniture mixed with solid wood and wood-based panels. That is, the side panels, the top, the bottom, the shelf and the like are made of thin wood veneer particle board or medium density board fiberboard, and the doors and drawers are made of solid wood. This process saves wood and reduces the cost; the panel furniture is made of artificial board ( Medium-density board, particle board, blockboard, etc.) are substrates, and the surface is decorated with artificial wood color skin or thin veneer, melamine board and other materials for the furniture.

Consumers can judge whether the furniture is really made of solid wood. The following five steps can be taken:

The first step is to judge the nature of solid wood by "smelling". Most woods have woody notes, pine has a rosin taste, and eucalyptus has a distinct camphor taste... but fiberboard and MDF have a strong pungent odor, especially in cabinet doors or drawers.

The second step is to observe the advantages and disadvantages of wood by “looking”. The main parts of the furniture, such as the pillars, the load-bearing horizontal bars connecting the columns and the ground, should not have large thrift or cracks or cracks; the frame should not be loose, and it is not allowed to break or break the material; All parts should be edge-sealed, and various parts must be installed with few pieces, missing nails and nails.

The third step is to check the polishing quality by “touching”. Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. Pay special attention to whether the table legs are rough, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.

The fourth step is to check the stability by "listening". For wooden furniture to have safety and stability, the two doors can be opened at 90 degrees, gently pulled forward by hand, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror should be Install the back panel and secure the glass side. Small pieces of furniture such as chairs, stools, hangers, etc., may be dragged on the ground when picking, gently fall and fall, if the sound is crisp, it means that the furniture making process and quality is better; if the sound is dumb, there is a murmur in the voice, indicating The blink of an eye is not tightly integrated.

The fifth step is to "know" the body. That is, ask the dealer about the production details and ask for the relevant certificates.

In addition to determining whether the selection is really solid wood furniture, but also note that the price and quality of solid wood furniture of different tree species are very different, beware of the shoddy business. Ordinary solid wood furniture usually uses ash, eucalyptus, eucalyptus, eucalyptus, pine, etc., while high-grade solid wood furniture mainly uses rosewood, rosewood, ebony and other precious materials. The current market for solid wood furniture is rather chaotic, and there are often phenomena of shoddy and confusing trees. Consumers are better off buying brand-name products to avoid being fooled.

Round Single Sided Light Box 

Specifications: 

Material

Aluminium/ Stainless steel/ Acrylic Panel

Size

Customized

Lighting Colour

White/ Pink/ Red/ Green/ Blue/ Yellow etc.

Lighting Source

Led Strips/LED module

Features

Waterproof/ Low Consumption / Bold Visual Effect etc.

Safe Voltage

Normally 12 DC, 110V~230V

Processing

Cutting, Sanding, Bending, Glue, Wiring, etc.

Application

Both indoor/ outdoor Decoration and advertisement.

Average Life Time

>60,000 hours

Working temperature

-20℃~60℃

Installtion Method

3M adhesive, Back screw bolts fixing or hanging, with 1:1 fixing template and accessories for Installation Reference

Packaging

Covered with bubble wrap and foam inside,and packed with wooden case outside. Also can be packed as your requirements.

Shipment

By express:(TNT/UPS/DHL etc.):4-5 Days

 

By Air:5-7 Days

 

By Ship:25-35 Days

OEM/ODM

Accepted


Models pictures:

RD

FAQ

Q: Are you a trading company or factory?
A: We are factory.

Q: What is the MOQ?
A: No MOQ required normally, that means you can always ask for a sample first. But remember the sample freight is at your own cost.

Q: Do I have to have a design to inquire?
A: Yes! A well made design/artwork is the most helpful thing to get an exact quote. However, if you really do not have a design...just let us know your idea, we'll cover it.

Round Single Sided Light Box

Bar Light Boxes,Beer Bar Light Box,Aluminum Rundlicht Box,Round Single Sided Light Box

Chengdu GodShape Sign Co., Ltd , https://www.signsgs.com

Posted on